background image

3. Program and Operation 

3.5.3 AE Setup (Auto Exposure Setup) 

Shutter speed is the duration of the electronic shutter. Set the shutter speed to operate 

automatically (Auto) or manually (Numeric Value).

Shutter speed is the duration of the electronic shutter. Set the shutter speed to operate 

automatically (Auto) or manually (Numeric Value).

The AGC (Automatic Gain Control or AGC Max Gain) adjusts the brightness of the pictures. The 

brightness increases as the number gets higher. 

SSNR enhances digital noise reduction properly. There are three settings: Low/Middle/High.  

When gain level is higher, SSNR will reduce the noise to make clearer image.

When Input luminance level is too dark, Slow Shutter function (DSS) is set automatically higher. 

- Enter into {Main Manu}.

- Select {Camera Setup} and move to {AE Setup} using joystick[

].

- Set AE mode for Full Auto, Manual, Shutter PRI.

- Press [Open] button or use joystick to save settings.

- Press [Close] button or use joystick to return to previous menu (Back).

AE Mode

Full Auto

Manual

SHUT FIX

WDR

Shutter 

(1/1~1/100,000)

X

O (1/1000) O (1/1000)

X

AGC Gain 

(00~36dB)

X

O (06dB)

X

X

AGC Max 

(Off/Low/Mid/High/Super)

O (default: High)

X

O (High)

O

DSS 

(0x2~0x128Fld)

O (Off)

X

X

X

Bright 

(00~15)

O (06)

X

O (06)

O

3.5.4 Day & Night Setup 

The Day & Night function improves the camera’s sensitivity at night or when the brightness level 

of the ambient environment. According to the luminance level, Day & Night filter is automatically 

switched.

- Enter into {Main Manu} 

- Select {Camera Setup} and move to {Day/Night Setup} using joystick [

▶]

.

- Set Day/Night for Auto, Day or Night.

- Set D&N Detector for Auto, Sensor or Video.

- Set switching time that you want.

- Press [Open] button or use joystick to save settings.

- Press [Close] button or use joystick to return to previous menu (Back)

22

AE SETUP

MODE 

: FULL AUTO

SHUT 

:

AGC GAIN 

:

AGC MAX 

: HIGH

DSS 

: OFF

BRIGHT 

: 06

SAVE : OPEN

BACK : CLOSE

D/N SETUP

DAY/NIGHT 

: AUTO

D&N DETECT  : AUTO

D/N DTIME  

: 03

SAVE : OPEN

BACK : CLOSE

Summary of Contents for KPT-SPDN231NH


































Reviews: