10.Function Menu operation
20
21
4)DAY & NIGHT (STANDARD TYPE Only)
- Press LEFT or RIGHT button in DAY NIGHT select the mode to
AUTO
B/W
COLOR.
4-1) AUTO
mode setup
- Press MENU button in AUTO
mode.
- Select item using UP/DOWN button.
- Adjust value using LEFT/RIGHT button.
- Press MENU in RETURN to return
to the previous screen
NOTE) Auto mode does not operate in
True D&N Type but operate in Standard type.
NOTE) When AGC mode is turned off, AUTO mode does not operate.
NOTE) The camera of True D&N type in Day & Night function is under
the control of photocell
①
DELAY
DAY
NIGHT or NIGHT
DAY conversion time setup
0 : No DAY NIGHT AUTO conversion
1~63 : Can set from 1 second to 15 seconds
②
START LEVEL
DAY
NIGHT conversion illumination intensity setup 0~255
0 : High illumination intensity, 255 : Low illumination intensity
NOTE) Initial value setup is recommended.
③
END LEVEL
NIGHT
DAY conversion illumination intensity setup 0~255
0 : High illumination intensity, 255 : Low illumination intensity
NOTE) Initial value setup is recommended.
4-2) B/W
mode setup
①
Press MENU in B/W
.
②
Move to screen on the right side.
③
Use LEFT, RIGHT button
to set BURST ON/OFF.
④
After setup, return to the previous screen
by pressing MENU button.
