KT&C KPC-SPDN120HD, Operation Manual

Page: 21 / 36

3. Program and Operation
3.4.4 Image Setup
This menu is for changing displayed image settings.
- Enter into {Main Menu}
- Select {Display} and move to {Image Setup} using joystick[
▶
].
- Using joystick [
▶
], Normal image, Horizontal image, Vertical image or
H / V image can be selected.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
3.4.5 MD(Motion Detection)
The dome camera can monitor the movement of image, and it sends an alarm message with
OSD and Alarm Out action. The level for sensitivity can be changeable.
* Note:
To stop alarming temporarily (about 10sec), press [ESC] button or [96+preset].
- Set sensitivity for 0~100. The higher value, the more sensitive.
- Set alarm mode for OSD/Alarm out/Both using joystick.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
3.4.6 Resolution Setup
The dome camera can be rebooted by resolution set.
ex)1080p30,720p60,720p30 -> 1080p25,720p50,720p25 : Dome camera is rebooted.
1080p30 -> 720p60 , 1080p25->720p50 : Dome camera isn't rebooted.
- Set a Resolution using the joystick [
▶
].
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
21
IMAGE SETUP
MIRROR : NORMAL
SAVE : OPEN
BACK : CLOSE
MOTION DETECTION
MD : OFF
SENSITIVITY :
ALARM :
ATIME :
SAVE : OPEN
BACK : CLOSE
RESOLUTION SETUP
RESOLUTION: 1080P30Hz
SAVE : OPEN
BACK : CLOSE