background image

4

1. CAUTIONS

1. A regulated DC12V 1A power supply is recommended for use with this camera

    for the best picture and the most stable operation.

An unregulated power supply can cause damage to the camera.

    When unregulated power supply is applied, product warranty will be

    out of subject.

2. It is recommended that the camera is used with a monitor that has a CCTV quality

    75 video impedance level.

    If your monitor is switched to high impedance then please adjust accordingly.

3. Do not attempt to disassemble the camera to gain access to the internal componets.

    Refer servicing to your dealer.

4. Never face the camera towards the sun or any bright or reflective light, which may

    cause smear on the picture and possible damage to the CCD.

5. Do not remove the serial sticker for the warranty service.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions;

1. This device may not cause harmful interference.

2. This device must accept any interference received, including 

     interference that may cause undesired operation.

Note

This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated 

in a commercial environment. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the instruction 

manual, may cause harmful interference to radio communications. Operation of this 

equipment in a residential area is likely to cause harmful interference in which case the 

user will be required to correct the interference at his own expense.” 

WARNING

This is a class A product. In a domestic environment this product may cause radio 

interference in which case the user may be required to take adequate measures.

Caution

Any changes or modifications in construction of this device which are not expressly 

approved by the party responsible for compliance could void the user’s authority to 

operate the equipment.

Summary of Contents for KPC-N501NUB















Reviews: