KNC-p3DR_IR IP Mini Dome Camera
·
Quick Operation Guide
11
11
installation is finished. If there is dust or grease on the
lens/dome cover, clean the lens/dome cover with clean soft
cloth and isopropyl alcohol.
●
Make sure that there is no reflective surface too close to the
camera lens. The IR light from the camera may reflect back into
the lens causing haze, distortion or improper scene exposure.
●
The foam ring around the lens must be seated flush against the
inner surface of the cover/bubble to isolate the lens from the IR
LEDS. Fasten the lens/dome cover to camera body so that the
foam ring and the dome cover are attached seamlessly.
Mounting
Steps:
1.
Drill the screw holes into the ceiling according to the drill
template.
Figure 2-1
Drilling Template
Screw Hole
Screw Hole
Screw Hole
Ceiling Mounting