KNC-p3BR28V12IR Varifocal Bullet Camera Quick Operation Guide
14
14
3.
If you need to route cables through the wall (or ceiling), cut a cable
hole in the center of the drill template. Skip this step, if you want
to route the cables along the surface of the wall or ceiling.
4.
Connect/route the camera cables.
5.
Secure the camera to the wall (or ceiling); use with expansion
anchors if needed. Refer to the Figure 2-5. Be sure surface can
support camera plus any additional wind or snow/ice loading. The
surface should support at least three times the weight of the
camera.
Figure 2-5
Secure the Camera
