5
Solar Controller Diagram
Solar Controller Operation
Step 1: Connect the battery. If the connection is correct, the controller screen lights up; otherwise,
check whether the connection is correct.
Step 2: If sunlight is present and strong enough (the solar panel voltage is greater than battery
voltage), the sun icon on the LCD screen is on; otherwise, check whether the connection is correct.
10A 12V
PWM
SOLAR CHARGE CONTROLLER
KT70756
AMP /
VOLT
BATTERY
TYPE
Hold for 3 seconds
for settings
LCD
10A 12V
PWM
SOLAR CHARGE CONTROLLER
KT70756
AMP /
VOLT
BATTERY
TYPE
Hold for 3 seconds
for settings
LCD
Wiring Connections
To protect the Battery and the Solar Panel, we strongly recommend that you place inline fuse on the
positive wire on both the “Solar” and “Battery” Circuits. 20A fuse for 10A controller.
The Solar Controller has 4 terminals which are clearly marked ‘Solar’ and ‘Battery’.
Refer to the wiring diagram below.
USER MANUAL
