Solar Controller Specifications
Type
PWM
Operating Temperature
-20°C to +80°C
Operating Voltage
12V
Rated to (Amps)
10A
Rated to (Voltage)
12V
Battery Voltage
12V
Dimensions (mm)
100 (H) x 130 (W) x 28 (D)
Product Weight
1.20kg
Manufactured from material
Polycarbonate
4
Solar Controller Features
•
10Amp, 12V Suitable for Solar Panels up to 150 Watts
•
LCD Information Screen
•
Selction modes for battery type and LCD screen Modes
•
Advanced Pulse Width Modulation Technology (PWM)
•
6 LED's denote charging and battery status
•
Suits AGM, Gel, Wet, Calcium & Lithium Batteries
•
100% no condensation - potted
•
IP65 Rated (dustproof & splashproof
The KT 10 Amp Solar Charge Regulator is designed to regulate the amount of charge coming from
the panel that flows into the deep cycle battery in order to avoid batteries being overcharged.
KT's range of solar regulators are PWM (Pulse Width Modulation) which are the most commonly
used, making them suitable for use on panels that are constantly being transported or moved eg; on
the roof of a caravan, fitted to the back of a transportable, folding solar panel etc.
PWM solar chargers use technology similar to other modern high quality battery chargers. When a
battery voltage reaches the regulation set-point, the PWM algorithm slowly reduces the charging
current to avoid heating and gassing of the battery, yet the charging continues to return the
maximum amount of energy to the battery in the shortest time. The result is a higher charging
efficiency, rapid recharging, and a healthy battery at full capacity.
USER MANUAL
