- 11 -
1.5.3 Display instruction
1) The main interface below comes out when the power is connected or the system is in
cold start. See Fig1
Fig.1
：
Main interface
2) Press any key, it will change to the basic status interface , see Fig2 below
Fig.2
：
Basic status interface
3) Press the
◀
or
▶
button, it will change to main menu, see Fig3
，
Fig.3
：
Main menu
4) An arrow icon will come out on the LCD when pressing the ENT, then, the data info,
status info, setting info, command control can be selected by pressing the right or left
arrow button, and checking the details by pressing
5) Select and confirm the data info to be viewed in detail. It contains the details of the
AC input /output , inverter, battery , BUS, parallel , temperature. See Fig 4
～
Fig 12
below.
Fig.4
：
MAIN INPUT INFO Fig.5
：
OUTPUT INFO Fig.6
：
OUTPUT INFO
YDC9310
10KVA
MODE:On-Line
Volt:AN BN CN
Vin: 220 219 221
Vout:220
FIGURE
STATUS
SETTING
COMMAND
Figure
Mains
A:225.9 B:224.8
C:225.5
Figure
Output
220.0V 0.0A
50.0HZ
Load: 0%
Figure
Output
0KW PAK: 0
0KVA