16
Storage
Before storing, charge the UPS 5 hours. Store the UPS covered and upright in a cool, dry
location. During storage, recharge the battery in accordance with the following table:
Storage Temperature
Recharge Frequency
Charging Duration
-25°C - 40°C
Every 3 months
1-2 hours
40°C - 45°C
Every 2 months
1-2 hours
6. Options
SNMP card
: internal SNMP
◆
Loosen the 2 torquescrews (on each side of thecard).
◆
Carefully insert the SNMP card and lock the screws
The slot called SNMP supports the MEGAtec protocol.We advise that Net AgentII-3
port is also a tool to remotely monitorand manage any UPS system
NetAgentII-3Ports supports the Modem Dial-in(PPP) function to enable the remote
control via the internet when the network is unavailable.
In addition to the features of a standard NetAgent Mini,NetAgent II has the option to
add Net Feeler Lite to detect temperature,humidity,smoke andsecurity
sensors.Thus,making NetAgent II aversatile management tool.NetAgent II also supports
multiple languages and is set up for web-based auto languagedetection.
Typical topologyof the UPS NetworkManagement
Relaycard
Mini dry contact card is used foproviding the interface for UPS peripheral monitoring.
The contact signals canreflect UPS running status.The card is connected to peripheral
monitoring devices via terminal board to facilitate the effective monitoring of the
real-timestatus of UPS and timely feedback the statusto monitor when abnormal situation
occurs(suchas UPS failure, mains interruption,UPS bypassand ect.). It is installed in the
intelligent slotof the UPS.
The relay card includes 6 output ports and one input port.Please refer to thefollowing table
for detail.
