Installation and Operation Manual 43
8.2.5 Installation Location
Figure 13
1. The inverter is suitable to be installed on vertical or backwards
tilt wall as shown above, the tilt angle should be less 15°.
2. Don’t install inverter on forward tilt wall.
3. Don’t install inverter on horizontal wall.
4. Mount the inverter at height same as eyesight for easy operation
and data reading.
8.2.6 Installation Procedure
1. Stick the installation formwork from the packing list to the wall.
Use Ø14 driller kit to drill installation holes according to the hole
position of the formwork.
Figure 14
2. Clean the dust inside the holes, and insert expansion bolt into the
holes. Make the expansion pipe into the wall, screw the bolt, take
the formwork, aimed at the hole, then tighten by pipe.