DC-IN Power Outlet
WPC-832-CON is powered by a 12V DC (Inner positive, outer negative) power supply and 1.0A
current. Connecting the AC plug to the AC power socket and put the DC Jack plug into the outlet of
device. The “SYS” (or “PWR”) green color LED will be ON when power properly supplied. Terminal
Block (2 wires) power supply is alternative.
DC Power outlet
Reset Button
In any case you forgot the password or have incorrect settings must to set Concentrator back to
default. Use the Reset button. At first, power on the device, then press Reset button by more than
20 seconds and then release to reset the device to the factory default.
LED Indicators
PWR(green):
After power on, this LED is always ON.
SYS (green)
:
LED is ON after power on, then start blinking per second a after system running.
POE(red):
for PoE (Power on Ethernet) indication if device with this function.
WIFI(red):
LED is ON after power on, then off a while. It starts blinking after Wi-Fi module is ON.
TX / RX (Red / Green)
：
：
：
：
Data sending or receiving indicator. When data sent out to the network or
receiving from the network, the LED will be blinking.
