Product Features
□
□
□
Data Conversion between RS-232/422/485 and Ethernet
Convert serial device (RS-232, RS-422, RS-485) data/signal into the TCP/IP package
data/signal and send them out with the Ethernet DataStream; or convert the TCP/IP
package data/signal into serial device data/signal.
□
□
□
Digital I/O Controlled Via Ethernet
(For OEM only)
Convert the sensors’ statuses (the sensors are connected to the ARM-7 Series converters)
into the TCP/IP package data and send them out with the Ethernet DataStream; or use the
TCP/IP package data to activate/deactivate the specified digital outputs.
Note: This function is for OEM only. Please contact your sales representative for further
information.
□
□
□
Dynamic IP Configuration
Support DHCP client mode, simplifying network address configuration and management.
□
□
□
Dual LAN Speed
Support 10/100 Mbps Ethernet, auto-detected.
□
□
□
Server / Client Dual Modes
ARM-7 Series can be configured as network server or network client. In the client mode,
it can be installed in network which is protected by NAT router or firewall, without the
need of a real IP address.
□
□
□
Web-based Setup
Parameters setup is based on HTTP protocol by using standard browsers (IE and
Netscape). No special software would be required.
□
□
□
Built-in Security Control
Protected by both setup password and access password to prevent intruders.
□
□
□
Remote updated
Firmware can be reprogrammed directly via Ethernet network to keep up with latest
network standards.
KSH International CO., LTD.
7