8
SENSOR DISASSEMBLY
In slot at sensor bottom, use screwdriver to push inward (1).
Remove cover (2).
Push outward on PC board latch at sensor base right side. Using PC board as handle,
gently lift PC board right side and remove. (3).
2
1
Installation height: 2,3 m.
Installation height: 3 m.
1
2
3
Identify necessary holes on diagram:
1. For wall mounting or 45 degree wall mounting, knock out hole covers.
2. For bracket mounting, use drill to open a 3 mm hole in the center of the square
recess at the rear of the base.
3. Cut cable wires to appropriate length and connect wires to sensor terminal
block .