7 Trouble-shooting
25 of 34
Deep Lift System
2553.89/04-EN
7 Trouble-shooting
WARNING
Improper work to remedy faults
Risk of injury!
▷
For any work performed to remedy faults, observe the relevant information
given in this operating manual and/or in the product literature provided by the
accessories manufacturer.
If problems occur that are not described in the following table, consultation with KSB
Service is required.
Table 9:
Trouble-shooting
Fault
Possible cause
Remedy
The pump cannot be hooked on.
The hook is jammed or does not
move into its open position / closed
position.
Clean and oil the parts.
The spring is not working.
Defective spring or deposits on the
spring
Clean the spring. Replace it if
necessary.
The lifting accessory is not correctly
positioned on the bail.
Deformed guide plate
Repair the guide plate.
The hook does not engage into the
bail.
Encrusted bail or severely
contaminated bail
Clean the bail.
The parts cannot be fastened in
accordance with the instructions.
The screws are missing.
Procure the screws specified.
Summary of Contents for Deep Lift System
Page 1: ...Lifting Accessory Deep Lift System Installation Operating Manual Mat No 01512337...
Page 32: ......
Page 33: ......
