KSB BOAX-B Installation & Operating Manual Download Page 17 | Manualshive

Page: 17 / 50

background image

5 Installation at Site

17 of 50

8417.8/20-EN

5 Installation at Site

5.1 General information/Safety regulations

The consultant, construction company or operator are responsible for positioning
and installing the valves. Planning errors and installation errors may impair the
reliable function of the valves and pose a substantial safety hazard.

WARNING

Damage to pressure enclosure or add-on parts

Leakage from or rupture of the valve

Valve/add-on parts not functional

▷

Check the valve for in-transit damage prior to installation.

▷

Check any add-on parts for in-transit damage.

▷

Do not install damaged valves.

5.2 Installation position

DANGER

Dead-end valve

High-pressure hazard!

Risk of burns!

▷

Protect the valve against unauthorised and/or unintentional opening.

A valve installed at the end of a pipeline and closed with a blind flange must not be
regarded as a dead-end valve.

Recommended upstream and downstream stabilisation distances

Fig. 9:

Recommended minimum distance between the valve and a tee or elbow

If the actual distances are shorter than the minimum distances in drawings 1, 2, 3 and
4, the valve disc must be positioned at an opening angle of 70 .

Upstream and downstream stabilisation distances are also required for valves
installed on the pump discharge side.

«
...
15
16
17
18
19
...
»

Summary of Contents for BOAX-B



















































Reviews:

No comments

Related manuals for BOAX-B

Brand: Vacon Pages: 62

Brand: Gardena Pages: 100

Brand: IBM Pages: 72

Brand: Garmin Pages: 4

Brand: Harmonic Drive Pages: 85

Brand: Parkside Pages: 86

Compact Comfort VAV12

Brand: SAI HVAC Pages: 16

Brand: saia-burgess Pages: 203

Brand: Sailor Pages: 1

Brand: SOMFY Pages: 112

Z1000 CIMR-ZU*A Series

Brand: YASKAWA Pages: 340

Brand: ETC Pages: 8

Brand: Gemini Pages: 9

Brand: M-system Pages: 18

Brand: Comparato Pages: 20

Brand: Aqua Lung Pages: 24

Brand: M-system Pages: 7

Brand: Texecom Pages: 21

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands