KS CONTROL UNIT 4 - ASSEMBLING INSTRUCTIONS, OPEN RECESS OR RETROFIT
B. Installing the skeg control
4 box and connector tube in
the open surface recess or
retrofit without any recess
by using the KS-adapter box
for skeg control 4.
If having a surface recess in the
deck without integrated closed box
(composite kayaks) skeg control box
can be installed by using optional
KS-adapter box for skeg control
4. Adapter box has rubber sealing
to ensure the connection. Screw
connection allows firm tightening
and enables later dismantle. Adapter
box also has a place for tube
connector to make the connection
water tight. Please check tube
connector installation from above in
section 1.
Skeg control 4 box fits in to the
recess from outside of the kayak.
Adapter box and sealing connects
the control box from inside of the
kayak. These two components
are fixed together with 2 screws,
O-rings, washers and nuts that are
included. Tighten the screws firmly
to make the connection water tight.
When skeg control box is connected
to the deck it is most easy to
string the skeg rope inside in the
tube already in this stage before
continuing assembly.
KAJAK SPORT COMPONENTS
1
2
