KS CONTROL UNIT 4 - ASSEMBLING INSTRUCTIONS, PREMADE DECK RECESS
INSTALLING THE SKEG CONTROL UNIT 4
A. Installing the skeg
control 4. box and KS-tube
connector for premade deck
recess
When kayak has a premade deck
recess for skeg control unit. The
assembly is started from mounting
the KS-tube connector. KS-tube
connector requires ø11 mm hole
in the aft end of the control unit
recess. Push tube connector female
part all the way in to the end and
make sure the O-ring is left outside
of the hull to ensure proper sealing
for the inlet. Push the PA-tube
inside in the male part, It will go in
around 27 mm and seal itself against
the male part. Push female part
around the male part. Screw male
and female parts firmly together to
secure and seal the complete inlet.
Skeg control box has 3 mounting
screw holes. In premade deck recess
one or two screws will be enough
for secure installation. Ready-made
nut inserts are the quickest way to
connect it. Place the skeg control
box inside in the recess and secure
from the bottom with screws that
are included.
KAJAK SPORT COMPONENTS
