Krups xp7225 ESPRESSERIA AUTOMATIC, Manual, Page: 13 / 17

Share

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

Page: 13 / 17

Krups xp7225 ESPRESSERIA AUTOMATIC Manual Download Page 13

12

AUTOMATIC DESCALING PROGRAM – TOTAL DURATION: ABOUT 22 MINUTES

The quantity of scale deposited depends on the hardness of the water used. The machine will automatically warn you with a
message when you need to proceed with descaling.

To perform the descaling program, you will need a container with minimum capacity of 2.0 oz and a Krups F 054 (40 g)
descaling powder.

The descaling program is in three parts – the descaling cycle itself, then 2 rinsing cycles.
Press button to perform descaling at any time and then choose MAINTENANCE => OK => DESCALING from the
menus displayed.

Caution! To benefit from the warranty conditions, it is essential to perform the machine descaling

cycle when the machine tells you to do so. Be sure to follow the order of operations.

You can continue to use the machine but you are advised to perform the operation as soon as possible.

Press the button to start the automa-
tic descaling program when this message is
displayed.

Clean the cleaning tray, the drip
tray, the coffee grounds collector
and the drip tray grid with hot
water and a liquid detergent.

Rinse the water tank
with fresh water.

Only use Krups descaling products. You can obtain descaling products from Krups Service Centers.
Do not use conventional starchy sulphonic acid or other products containing acid.
The manufacturer may not be held responsible for damage to the machine through use of cleaners or descalers
not specifically recommended.

Be sure to complete the entire descaling cycle to avoid any risk of intoxication.

Do not put your hands under the coffee outlets during the cycle.

Make certain to protect your work surface during descaling cycles, especially if they are made

of marble, stone or wood.

Just follow the instructions shown
on the screen, making sure the
powder dissolves fully.

If the coffee grounds collector is not fitted you will be warned by a message being displayed.
Fit the collector again for the cycle to continue automatically.

If a power failure occurs during the cycle, you will have to start it again right from the beginning.

You will not be able to postpone this operation.

GENERAL MAINTENANCE

Always remove the power supply cord from the socket and let your machine cool down before cleaning it.
Do not use utensils or cleaning products likely to scratch or corrode the machine.
Wipe the body of the machine on the outside using a moist cloth.

If your product is equipped with our Claris - Aqua Filter System cartridge F088, please remove this
cartridge during the descaling operation.

FALC DISP USA dernière version 7220.qxp 7/06/06 9:56 Page 12

«
...
11
12
13
14
15
...
»

Summary of Contents for xp7225 ESPRESSERIA AUTOMATIC


















Reviews:

No comments