11
If the above message
appears, remove, empty
and clean the drip tray.
The drip tray receives residual water and the coffee grounds collector receives used coffee grounds.
The coffee cleaning tray allows you to eliminate any deposits of coffee grounds above the percolation chamber.
Remove, empty and
clean the coffee
grounds collector.
The drip tray is equipped
with floats to tell you
when to empty it.
The warning message will remain displayed if the coffee grounds collector is not inserted correctly.
If the coffee grounds collector is inserted within less than 8 seconds, the machine will ask you to confirm that you
have correctly emptied it. You cannot make espresso or coffee while the warning message is displayed.
The coffee grounds collector has a maximum capacity of 12 coffee cakes.
MAINTAINING YOUR MACHINE
As soon as you remove the coffee grounds collector, you will have to empty it completely to avoid any overflow.
Remove the coffee
cleaning tray.
Clean it under water
and dry thoroughly
before re-inserting.
EMPTYING THE COFFEE GROUNDS COLLECTOR, THE COFFEE CLEANING TRAY AND THE DRIP TRAY
RINSING THE SYSTEM - SEE “BEFORE FIRST USE” SECTION
AUTOMATIC CLEANING PROGRAM – TOTAL DURATION: ABOUT 20 MINUTES
You should perform the cleaning program after every 350 preparations of espresso or coffee.
The machine will let you know automatically on the display screen.
Caution! To benefit from the warranty conditions, it is essential to perform the machine cleaning
cycle when informed to do so. Be sure to follow the order of operations.
You can continue to use the machine, but you are advised to perform the program as soon as possible.
To perform the cleaning program, you will need a container with a minimum capacity of 2.0 oz and a Krups XS 3000
cleaning tablet.
The automatic cleaning program
is in three parts – the cleaning
cycle itself, then 2 rinsing cycles.
This program lasts about 20
minutes.
Press button to perform
cleaning at any time and then
choose MAINTENANCE => OK
=> CLEANING from the menus
displayed.
Press the button
to start the automatic
cleaning program when
the “Cleaning needed”
message is displayed.
Just follow the
instructions
shown on the
screen.
If you press the ‘On/Off’ key during cleaning or in the event of power failure, the cleaning program will start
again right from the beginning. You will not be able to postpone this operation. This is essential due to water
system rinsing reasons. In this case, you will need to use another cleaning tablet. Be sure to complete the entire
cleaning cycle to avoid any risk of irritation (seek medical advice if cleaning solutions are accidently swallowed).
The cleaning cycle is a discontinuous cycle. Do not put your hands under the coffee outlets during the cycle.
Only use Krups XS 3000 cleaning tablets. We cannot be held responsible for any damage that may result
from the use of tablets from other brands.
You can obtain cleaning tablets from Krups Service Centers.
Make certain to protect your work surface during cleaning cycles, especially if they are made of
marble, stone or wood.
FALC DISP USA dernière version 7220.qxp 7/06/06 9:56 Page 11