background image

English

14

5. MAKING AN ESPRESSO

In  order  to  extract  the  maximum  flavor  from  the  beans,  this  machine 
pre-infuses  each  cup.  The  pump  works  for  3  seconds,  pauses  for 
3 seconds, and then continues until the cup is finished

P R E H E AT I N G   T H E   A C C E S S O R I E S

For the best results, we recommend that you preheat the filter holder 
before espresso grounds are added, and warm the cups.

n

Fill  the  water  tank  with  fresh  cold  water  and  turn  the  machine  on

(fig.1, 2, 3 and 4)

.

n

Put the filter holder in place, place the cups below.

As  soon  as  the  required  temperature  is  achieved,  the  light  will  stop 
flashing.

n

Turn the dial to the 

position 

(fig.8)

n

Press either the button 

for 1 cup or the 

button for 2 cups.

n

When  the  cups  are  filled  with  hot  water,  turn  the  dial  to  the 
position 

(fig.10)

.

n

Remove the cups, taking care to not spill the water.

n

Unlock  the  filter  holder  by  pressing  the 

button  on  the  handle

while turning the handle to the left to release, and remove the filter
holder from the machine 

(fig.11)

.

Note: Use the cup warming tray to warm espresso cups.

W I T H   G R O U N D   C O F F E E

The type of coffee you choose strongly influences the strength and
flavor  of  your  espresso.  Always  use  coffee  beans  ground  to  the 
proper size for espresso. Too fine a grind will result in espresso that
is  over-extracted  and  bitter.  Too  coarse  a  grind  will  result  in 
espresso that is under-extracted and weak in flavor. The perfect 
espresso  grind  will  feel  like  fine  grains  that  do  not  clump  when 
pressed together.
Store your espresso grounds in an airtight container, and in a cool,
dry place to retain the flavor. Grounds should not be kept for long

periods of time as the flavor will be reduced over time. 
Do not use instant coffee, or coffee for drip coffee machines.

Summary of Contents for XP4600





























Reviews: