Krups XP3410, Manual

Page: 27 / 134

25
English
5. Plug the appliance in (1).
6. Press the on/off switch (5).
7. When the temperature light on the on/off switch stays on (6), press and hold the
Espresso button (D2) for 40 to 50 seconds (water will flow through the filter holder) (9).
8. Empty and replace the container if necessary.
9. Wait 5 to 10 minutes, then repeat the procedure twice.
10. Ensure that you do not empty the tank completely (in the case of deactivation, see
paragraph:
USING FOR THE FIRST TIME
).
B. Rinsing
IMPORTANT!
After descaling, rinse two or three times with clean water (without coffee),
as described in the paragraph on "USING FOR THE FIRST TIME".
The appliance has been descaled and is ready to use again.
GUARANTEE
Your appliance is guaranteed, however, any connection or handling error, or use other
that that described in the instructions will render the guarantee void.
This appliance is guaranteed for domestic use only, any other type of use will render
the guarantee void.
No repairs due to a build-up of limescale shall be covered by the guarantee.
For any after-sales problem or for spare parts, please contact your retailer or an
approved service centre.
SOLUTIONS TO POSSIBLE PROBLEMS
PROBLEMS POSSIBLE CAUSES SOLUTIONS
The grounds are very
damp. You haven't added enough
ground coffee. Add more coffee.
The espresso flows
through too slowly. The ground coffee is too
fine, too greasy or floury. Choose a slightly more
granular coffee.
The filter holder is dirty. Clean the filter holder
according to the
instructions in paragraph
CLEANING AND
SERVICING ‑ B. The filter
holder.
Clean also the
coffee filter.
The grid through which the
water passes is clogged. When the appliance has
cooled, clean the grid with
a damp sponge.
Your appliance has a build-
up of limescale. Descale your machine
according to the instructions
in the user manual.