12
Comments
21-22-23
If you want to cook food to
different personal tastes, open the
grill and remove the food when it has
reached the desired level and then
close the grill and continue cooking the
other food. The program will continue
its cooking cycle until it reaches the ‘well
done’ level.
24 Keep warm function
When the cooking process has ended
the appliance will automatically go on
the keep warm setting after having
reached the “well done” level. If food is
left on the grill it will continue to cook,
while the cooking plates are cooling.
Comment:
the safety system will turn
the appliance off automatically after a
certain amount of time.
Second cooking
If you want to cook more food, please
refer to step 12.
21
22
23
24
Cooking more food
If you want to cook a second batch of food, please pre-heat the appliance again (starting from point 9 in
automatic mode or point 25) even if you want to cook the same type of food.
How to cook another batch of food:
After finishing your first batch of food:
1. Make sure the appliance is closed with no food inside.
2. Select the appropriate cooking mode/program (this step is necessary even if you decide to pick the same
cooking mode than for the previous batch of food).
3. Press “OK” to start preheating. During this phase, the temperature indicator (in MANUAL mode) or the
PREHEAT indicator (in automatic mode) will flash. This stage is mandatory even if your appliance seems
hot.
4. The pre-heating is complete when an audible beep is heard and the cooking level indicator stops
flashing.
5. After the pre-heating, the appliance is ready for use. Open the grill and place the food inside the
appliance.
Important:
- Please note that with any new batch of food, the pre-heating phase is mandatory.
Remember to always have the grill closed and no food inside in order for the preheating to effectively
function.
- Then wait for the pre-heating to be complete before opening the grill and place the food inside.
N.B.:
if the new pre-heating cycle is carried out immediately after the end of the preceding cycle, the
pre-heating time will be reduced.
