Krups GVE1, Manual

Page: 7 / 26

7
Recommendations :
Cans to be opened should be held by hand as
opening is completed.
When cans are damaged, it may be necessary
to make several attempts.
. The knife-sharpener function
• Remove the knife-sharpener from its storage
position (a).
• Open the positioning aperture (e) and latch
in the accessory (4) . The two slots located
on the top of the accessory allow you to
sharpen both sides of your knife.
• Start the appliance by pressing the handle
(b1).
• Position the knife with the side to be
sharpened downwards, and press lightly
while moving the knife along (5).
• Clean the sharpening dust away with a
cloth.
• Maximum use without stopping: 5 minutes.
. The bottle-opener function
• Close the knife-sharpener holder (e).
• To remove the cap from a bottle, place the
bottle in the bottle opener (d) (6).
Cleaning
• After use, disconnect the appliance.
• Clean the motor block and the knife-
sharpener with a damp cloth.
• The handle assembly (b) can be removed
during cleaning. Lift it fully and pull it
forward to remove it. This should not be put
in the dish washer.
Storage
• You have the option of storing your lead (g)
and fixing your appliance to the wall (f).
• To facilitate storage in a cupboard or a
drawer, you can fold down the magnet.
What to do if your appliance
does not work
Check :
- the connection
- that your can is correctly positioned in
relation to the appliance.
If your appliance still does not work,
contact an approved Krups service centre (see
list in the service booklet).
OPEN CONTROL GVE1.PM6.5 - copie 16/01/04, 14:48 7