Krups Espresso Automatic EA90 Series, Manual

Page: 220 / 249

DE
FR
NL
IT
EN
19
ENGLISH
INSTALLING THE CLEANING LIQUID
n
Press “Now” to confirm or “Later” to do it later.
n
Open the left door (15). Pull the container (19) and screw the bottle (18)
onto the container.
n
Replace the container back with the bottle and close the door.
n
Do not screw in the bottle fully.
n
The bottle must be positioned in line with the drawer.
AUTOMATIC STEAM NOZZLE CLEANING PROGRAMME
n
Your machine will prompt you to start this programme.
n
To do so, press “Now“ . The cycle will last about 5 minutes and the screen
will display the progress of the cleaning.
PREHEATING, AUTOMATIC MAINTENANCE, RINSING
n
The machine will start by preheating the circuits, then will carry out an
automatic test and finally will ask you if the appliance needs to be rinsed
or not.
n
Place a container under the coffee nozzles and press YES if this is required.
The rinsing procedure starts and stops automatically, after around 40 ml
have passed through.
n
The main drink selection menu is then displayed on the screen.
h
Important:
Ensure that all of the lids, covers and doors are closed and that all parts of the machine are
fitted correctly before starting to prepare a drink.
!
Note:
If the first use cycle is interrupted before it has fully completed, you will be asked to save certain
parameters again or to confirm certain settings.
!
IFU_EN_KR_COFFEEMAKER_8020000082.qxp_Mise en page 1 22/05/2017 17:22 Page19