7
Press the button, wait for the end of pre-heating and perform a rinsing operation if you wish.
You can change the
volume of water at any
time using the rotating
button.
Use the rotating button
to select your drink and
confirm by pressing the
OK key.
The drink selection
menu will be displayed.
The ground coffee is first moistened with a little hot water after the grinding stage.
A few moments later, percolation as such starts.
You can use your appliance to make 2 cups of coffee or espresso. Remember not to remove the cups after the first cycle.
You have now prepared your appliance. The drink select menu will be displayed.
Put two cups under the cof-
fee outlets.
You can lower or raise the
coffee outlets to suit the
size of your cups.
Put a cup under the coffee
outlets.
You can lower or raise the
coffee outlets to suit the
size of your cups.
Select your drink and confirm by
clicking twice on the OK key. A
message will appear to tell you
that you have chosen two cups.
If the tray is full or the water tank is empty while preparing the first coffee, the second cycle will not be run.
You will then have to restart your second cycle after you have seen to things.
The appliance will
automatically sequence 2
complete coffee-making
cycles.
To stop coffee flowing into the cup, you can either again press a key or turn the rotating button to reduce
volume.
x 2
TWO-CUP FUNCTION
There is a temperature setting function to control how hot your coffee is (see Settings).
PREPARING STEAM
Steam froths up the milk to make a cappuccino or a caffe latte, for example, and also heats up liquids. As you need a higher
temperature to produce steam than to make an espresso, the appliance runs an additional pre-heating phase for steam.
While the screen displays the drink selection menu, press the “steam” key . A screen
will inform you that the appliance is being pre-heated. Once the pre-heating phase has
been completed, a message will ask you to place a recipient under the steam nozzle.
Press the “steam” key again to start generating steam. A little water will be produced
first and then steam will start. Use the same key to stop steam generation.
