Krups Espresseria Automatic EA80 Series, Manual

Page: 22 / 187

17
ENGLISH
Do not fill the water tank with hot water, milk or any other liquid. If you turn on the
appliance when the water tank is not in place or not correctly filled (under the “min.”
level,), the “fill water tank” light will come on and making an espresso or a cup of coffee
will be made impossible.
First use / setting up the appliance
Use the rotating button to select a function, increase or reduce values. Confirm your choice
using the
OK
key.
Press “On / Off” to turn your appliance on. Follow the instructions that appear on the “choice
of language” screen -
Fig. 10 . Use the rotating button - Fig. 11 , to choose a language
(highlighted) - Fig. 12 .
Press the OK key to validate - Fig. 13 .
When you first use your appliance, it will ask you to set several parameters. If you unplug
your appliance, you will again be asked for some of these parameters.
The appliance will ask you to set:
Language You can select your chosen language from those offered.
Measurement unit Choose either ml or oz as your measurement unit.
Date You must set the date.
Clock
You can choose between 12 hour or 24 hour time display.
Auto-off
You can choose the period after which your appliance will stop
automatically.
Auto-on You can automatically start pre-heating of your appliance at your
chosen time.
Water hardness You must set your water hardness between 0 and 4. See “Water
hardness measurement” section.
Filter
You must indicate whether a filter is fitted or not (Claris – Aqua
Filter System cartridge)
When being used for the first time, it is possible that the machine will ask to be filled up. Just
follow the instructions on the screen.
Rinsing of circuits
Rinsing out the coffee circuit :
Once you have turned the machine on and the preheating stage has completed, you can
rinse out the coffee circuit. Place a container under the coffee outlets then select
“YES”
from the menu proposed.
Rinsing out the steam circuit :
Place a container under the steam nozzle. Press the key to rinse the steam circuit -
Fig. 14 . The rinsing cycle will stop automatically after the volume of water displayed has
flowed through.
Press
at any time to display menus to perform rinsing and then select MAINTENANCE
=> OK => RINSING .
It is best to perform rinsing after the appliance has remained unused for several days.
WHEN RINSING PROCESS IS IN PROGRESS, HOT WATER COMES OUT THROUGH
THE NOZZLES. BE CAREFUL NOT TO BE SCALDED.