English
14
PROGRAMMING THE UNIT
1 ) P R O G B U T T O N :
Use the
PROG
button
(s)
to access the 2 AUTO-START
(q)
functions of
brewing at preset time. The LCD will display a different function each time
PROG (s)
is pressed. The blinking display of previous setting or 9:99 at
first use and the icon show you that the unit is in a programming mode.
A u t o - O n s e t t i n g # 1 :
n
Press
PROG (s)
once
Fig.13
, P1 displays and the AUTO-START
program #1 is indicated with a red light
(r1)
.
n
Press the H and MIN buttons
(o)
to set a time for the machine to start
brewing automatically. You can press and hold the buttons to move
quickly through the hours or minutes.
n
Press
PROG (s)
when done. You will then be invited to set the second
program. You can skip this second step by pressing
PROG (s)
once
again.
A u t o - O n s e t t i n g # 2 :
n
Press
PROG (s)
twice
Fig.14
, P2 appears on the screen and the
AUTO-START program #2 is indicated with a red light
(r2)
. This second
preset start time can be used for days with others wake times (on
weekends for example).
n
Press
AUTO START
button to activate the programmation
Fig.15
.
n
After programming the automatic start time as described above, be sure
to prepare the machine for a brew cycle with water in the tank, coffee in
the brew basket, lid closed and coffee tank securely in place.
n
Press the
AUTOSTART
button
(q)
to choose preset number 1 or
number 2. You can check the preset times by pressing
PROG (s)
.
n
Once the programming is done, the LCD displays pictograms with the
current time.
n
The machine will brew automatically at the set time. The program will
need to be activated when needed again just by pressing on
AUTOSTART (q)
.
The setting of Autostart functions 1 & 2 can be adjusted
only during stand by mode (neither during brewing or
keep warm).
KR_CAFETIERE_ARUBA_NC00116597_Mise en page 1 30/10/12 17:09 Page14
