10
9
English
�
Clean the whisks and hooks before use. Rinse and dry them.
�
Insert the whisks (B) or hooks (C) until they are fully locked in place. Always insert the
accessory fitted with a toothed ring into the opening indicated on the hand-mixer by a
ring which is also toothed
(fig.2).
�
Plug in the hand-mixer.
�
Depending on the quantity being prepared, place the ingredients into a suitable container
(bowl or cup).
�
Place the whisks or hooks into the container and start the hand-mixer using the control
(a2).
�
To prevent splashes when starting or for delicate preparations (creams, sauces) your
hand-mixer is fitted with an anti-splash function. To use this:
�
Push and hold the control (a2) to the left into position “M”.
�
Release the control (a2) to return it to position “0”.
�
To continue preparation, select a faster speed
(fig.3).
�
Your hand-mixer is fitted with a Turbo control (a3), which enables you to use all the power
of your hand-mixer instantly just by pressing a button
(fig.4).
�
The appliance may be operated up to 6 minutes with the whisks or the hooks on the
fastest speed or in the ‘Turbo’ position”.
�
The whisks are used for light preparations as whisked egg whites.
�
The hooks are used for heavier preparations.
�
When you have finished, return the control (a2) to position “0”.
�
Unplug the hand-mixer.
�
Remove the whisks or hooks by pushing the ejection control (a3)
(fig.5).
USING THE APPLIANCE
USING THE HANDBLENDER (D) (*ACCORDING TO MODEL)
Check that the speed control
(a2)
is set to
“0”
.
• Remove the panel at the back of the appliance (A) and screw the handblender foot
(D) by turning clockwise without forcing it, until you will hear a small click, the rod is
correctly positioned (Fig. 12 to 13).
• Connect the appliance:
– Dip the Mixer rod in the preparation before starting to avoid splashing.
– Start using the Eject button
– Stop the appliance before removing from the Blender rod (to avoid splashes).
�
Always check that the speed selector is at “0” before turning
the appliance on.
�
To avoid damage to the appliance, never place the appliance
or its accessories in the freezer, oven or microwave.
�
The appliance and its accessories have been designed for
preparing food products. They must not be used for mixing
other products.
END-OF-LIFE ELECTRICAL OR ELECTRONIC PRODUCTS
The packaging is comprised exclusively of materials that present no danger
for the environment, and which may therefore be disposed of in accordance
with the recycling measures in force in your area. For disposing of the
appliance itself, please contact the appropriate service of your local authority.
Think of the environment first!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?
STORAGE
Check:
�
That it is plugged in correctly.
�
That the accessories are correctly locked.
�
The position of the speed selector (C2): turn it to position “0” and then select the
desired speed again.
�
Your appliance still does not work? Contact an approved service center (see list in last
page of this booklet).
Do not store your appliance in a humid environment.
If you feel resistance when tightening the rod it is not properly aligned. You should
remove it completely and re-screw correctly.
• Select setting
“0”
, disconnect the appliance and unscrew the handblender rod (I) by
turning anti-clockwise (Fig. 19).
