Kruger&Matz KMP60TW, Owner'S Manual

Page: 15 / 48

Owner’s manual
15
EN
2. LED indicators on the charging case indicate battery level:
during charging LED indicators on the charging case flash;
when the battery is full, all four LEDs are on.
3. When only one LED is on, battery level is low. Please charge
the battery.
4. It takes about 2 hours to fully charge the battery.*
* When earphones with not fully charged battery are placed inside
the case during charging, charging time may increase.
PAIRING
1. Remove the earphones from the charging case. The earphones
turn on automatically.* Blue LEDs on the earphones flash.
The earphones will automatically pair with each other within
3 seconds.*
* If the battery in the charging case is empty, it is required to turn
on the earphones manually by pressing the MFB for 3 seconds on
both earphones.
2. After the earphones pair with each other, they will enter
Bluetooth pairing mode (red LED and blue LED flash alternately
on the left earphone).
3. Enable the Bluetooth function on the external device and
search for new Bluetooth devices.