Kruger&Matz KM7089, Owner'S Manual

Page: 7 / 60

1. ON/ STANDBY KEY
2. FUNCTION: CD KEY
3. BACK/ TUNE - KEY
4. PLAY/ PAUSE KEY
5. NEXT/ TUNE + KEY
6. FUNCTION: USB KEY
7. MEM.-/ FOLDER - KEY
8. STOP KEY
9. MEM.+/ KEY
10. FUNCTION: CARD KEY
11. -10 KEY
12. +10 KEY
13. OPEN/ CLOSE KEY 14. FUNCTION: AUX KEY
15. MUTE KEY
16. EQ KEY
17. KEY
18. FUNCTION: TUNER KEY
19. PROG./ CLOCK ADJ. KEY
20. FM MODE/ PLAY MODE KEY
21. VOLUME - KEY
22. ALARM KEY
23. SLEEP KEY
24. SNOOZE KEY
25. BATTERY COMPARTMENT
- THIS SET WORKS ON NORMAL HOUSEHOLD AC-POWER.
- MAKE SURE THE SET VOLTAGE OF THE UNIT MATCHES YOUR LOCAL VOLTAGE.
- INSERT THE PLUG OF THE AC-CORD INTO A WALL OUTLET WITH AC-POWER.
- PRESS THE ON/
STANDBY KEY TO SWITCH “ON” THE UNIT.
- THIS UNIT IS DESIGNED TO OPERATE WITHOUT EVER BEING TOTALLY POWERED "OFF".
IT WILL EITHER BE "ON" OR "STANDBY MODE".
- IN STANDBY MODE, THE BLUE BACK-LIGHT OF THE DIGITAL DISPLAY WILL BE
SWITCHED OFF BUT THE DISPLAY WILL SHOW THE CURRENT TIME (CLOCK FUNCTION).
- WHEN IN STANDBY MODE, YOU CAN USE THE POWER SWITCH (ON REMOTE CONTROL
OR ON FRONT PANEL OF THE MAIN UNIT) TO SWITCH "ON" THE UNIT.
- TO CONSERVE ELECTRICITY, PLEASE SWITCH THE UNIT TO "STANDBY MODE"
WHEN NOT LISTENING TO RADIO OR CD MUSIC.
INTELLIGENT POWER SAVING SYSTEM
- THIS SET HAS A BUILT-IN POWER SAVING SYSTEM WHICH WILL AUTOMATICALLY PUT
THE SET INTO A "STANDBY MODE" TO REDUCE POWER CONSUMPTION WHEN IT DETECTS
THAT THE SET IS NOT IN USE.
- THIS AUTOMATIC SWITCHING TO "STANDBY MODE" WILL HAPPEN APPROXIMATELY
10-15 MINUTES AFTER THE FOLLOWING CIRCUMSTANCES:
(A) "CD" MODE: CD PLAYBACK HAS STOPPED (eg. AT THE END OF A DISC).
(B) "AUX" MODE: NO INPUT SIGNAL IS DETECTED AT THE AUX INPUT JACK.
(C) "USB" MODE: USB PLAYBACK HAS STOPPED.
(D) "CARD" MODE: SD CARD PLAYBACK HAS STOPPED.
- TO RE-ACTIVATE THE UNIT AFTER IT HAS AUTOMATICALLY SWITCHED TO "STANDBY
MODE",SIMPLY PRESS THE "ON/ STANDBY" KEY TO SWITCH THE UNIT ON.
PREPARATION OF REMOTE CONTROL
- REMOVE (GENTLY PULL OUT) THE PLASTIC "TAB" FROM THE BATTERY COMPARTMENT
AT THE REAR OF THE REMOTE CONTROL.
- TEST THE REMOTE CONTROL BY PRESSING THE ( ON/ STANDBY) KEY TO CHECK
THAT THE UNIT SWITCHES ON PROPERLY USING THE REMOTE CONTROL.
IMPORTANT : HOW TO TELL IF POWER IS "ON" ?
WHEN THE POWER IS “ ON ” THE ENTIRE DIGITAL DISPLAY WILL BE LIT UP WITH
A “ BLUE ” BACK-LIGHT. THIS INDICATES THE HI-FI IS SWITCHED “ ON ”.
7
KM7089
Krüger&Matz
REMOTE CONTROL
POWER SUPPLY
English English
Română
Deutsch
Polski