Kruger&Matz KM1584, Owner'S Manual, Page: 30 / 88

30
Owner’s manual
English
1. Open the battery compartment.
2. Insert 2 AAA batteries with correct polarity
(+/-) as indicated.
3. Close the battery compartment.
Note:
* Remove the batteries if the remote control is not going to be used for an extended
period of time.
* To avoid possible failure, read the following instructions and handle the remote control
properly.
* Do not drop or cause impact to the remote control.
* Do not spill water or any liquid on the remote control.
* Do not place the remote control on a wet object.
* Do not place the remote control under the direct sunlight or near sources of excessive
heat.
* Do not use caustic cleaners ( porcelain, stainless steel, toilet, or oven cleaner etc. )
on the remote, as it may suffer damage.
Remote Control Operation Range
1. Point the remote control towards the remote
sensor IR of the front of the unit.
2. Make sure that there is no obstacle between
the infrared remote sensor of the unit and
remote control.
Installation of Batteries