19
Owner’s manual
EN
3. PAIR
Note: The Kruger&Matz Activity 300 sport watch does not require constant
connection with your smartphone. All you have to do is pair sport watch
and smartphone, insert user data and wear the sport watch.
Note:
• Data synchronize automatically every time the sport watch and the app
are turned on and paired.
• Data on the pedometer and sleep monitor reset after 24 hours. If data
will not be synchronized within those 24 hours since last activity, they
will be lost.
• Synchronize data at least once a day.
To connect sport watch and smartphone proceed according to the below
steps:
1. Make sure you have logged in.
Note: Your sport watch can be binded with one account at the same
time. To connect the sport watch with another account, unbind it with
current account and then bind with a new one.
2. Enable Bluetooth connection on your smartphone.
3. Make sure the sport watch is on and in Bluetooth mode (press and hold
the LIGHT button for 3 seconds to enter Bluetooth mode). Bluetooth
icon blinks when the device is in Bluetooth pairing mode.
4. Enter [Bluetooth connection] in [Me] tab of the app, search for new
devices and pair with the sport watch (KM0285).
5. When the devices are paired, Bluetooth icon is on.
Notes:
• If pairing is not completed within 30 minutes, the sport watch will quit
Bluetooth pairing mode. In that case, press and hold LIGHT button for
3 seconds to reenter Bluetooth mode.
• Kruger&Matz Activity 300 sport watch requires Bluetooth 4.0
connection. Compatible with Android 4.3 and iOS7 (or higher).
OPERATION
Turn on/off
1. Press and hold MODE and START button simultaneously for 3 seconds
to turn on the sport watch (ON is displayed).
2. Press and hold MODE and START button simultaneously for 3 seconds
to turn off the sport watch (OFF is displayed).