Kruger KB650 ET, Use And Maintenance Manual

Page: 51 / 64

51
KB 650/850 GT-ET
REPLACEMENT OF BRUSHES
Central Brush:
−
Take away the rear drawer;
−
Lean the machine on its rear side;
−
Unscrew the 2 clamping screws (1);
−
Extract the central brush (2);
−
Assembly the new brush following the above-mentioned stages
backwards.
Lateral Brush:
−
Lift the brush support arm to a vertical position (2).
−
Unscrew fastening screws (1) and remove the worn brush (3).
−
Reassembly the new brush following the above-mentioned stages
backwards.
Note: After installing new brushes, check their height. If necessary,
adjust them.
1
2
1
3
1
2