Krüger & Matz KM9999, Owner'S Manual

Page: 5 / 13

Owner’s manual Owner’s manual
8 9
EN EN
◦
Press the yellow button to lock highlighted channel.
Press the EXIT button to save. After locking a channel,
accessing it will be locked with a password (default is
000000).
◦
Press the blue button to delete highlighted channel.
Press the OK button to confirm. Press the EXIT button
to cancel. Caution: deleting channel is irreversible. To
recover it, perform the channel scan.
◦
Press the favorite button to add highlighted channel to
a favorite list. Select the list (or select Disable to reset
the list assignment), press the OK button, then press
the EXIT button to save. While watching a program,
press the favorite button to view saved favorite lists.
• EPG: function is also available by pressing the EPG
button. Allows for browsing through TV programs.
• Sort: select channel sorting method.
• CN: Logical Channel Number; sorts the channels by their
numbers.
• Hotel mode: after enabling it, all of the settings will be
locked with a password.
Picture
• Aspect ratio, Resolution, TV format: display settings.
• OSD transparency: change the menu transparency.
Channel search
• Auto search: searching for channels with default
settings.
• Manual search: adjust the settings before searching.
• Antenna power: if enabled, the receiver will deliver
power to antenna output.
• Filtered scrambled channels: search for free (FTA)
channels only.
Time
In this menu you can adjust the time zone and automatic
shutdown (idle time, after the receiver will turn off).
Option
Settings for language, subtitles and sound.
System
• Parental control: before enabling it, input the password
(default is 0000000). Set the age from 4 to 18.
• Set password: change the parental control and lock
password.
• Restore factory settings: reset all data and set it to
factory settings.
• Information: show information about the system
software.
• Software update: update the software from USB.
USB
• Multimedia: playing movies, pictures and music from a
USB disk.
• Photo/movie setting: change the settings for playing
movies and pictures from a USB disk.
• PVR settings: select and format connected USB disk to
use with PVR function.
Caution:
• USB 2.0 disks are recommended. USB drives with low
parameters may not be compatible with the device.
• Large capacity USB drives may require external power
supply.
Recording
1. Make sure the flash drive is connected to the USB port
of the device, and is selected as recording device.
2. While watching a program, press the record button to
start recording. Press the stop button, to stop recording.
3. Recordings can be viewed in menu USB → Multimedia →
PVR, or pressing the blue button while watching a
program.
4. To set the recording timer, use the EPG function, and
press the INFO button to access recording timer
function.