Krüger & Matz KM1995, Owner'S Manual, Page: 12 / 58

Owner’s manual Owner’s manual
22 23
EN EN
to be used for an extended period of time.
• Do not drop or cause impact to the remote control.
Remote control operation range
1. Point the remote control
towards the remote sensor IR of
the front of the unit.
2. Make sure that there is no
obstacle between the infrared
remote sensor of the unit and
remote control.
Connecting speakers
1. Plug the banana plugs to corresponding colors in the
speaker and in the unit.
OR
1. Slightly unscrew the nuts on the sockets on the back
of the main unit.
2. Insert the stripped part of the wire completely. The
right speaker cables should be connected to the "R"
socket, the left speaker cables to the "L" socket,
making sure that the cables connected to the central
unit are connected to the speakers in the same way
(red socket on the central unit to the red socket on the
loudspeaker, black in the same way as red).
3. Tighten the socket nuts firmly so that the inserted
wires do not fall out.
18. Scan stations button
19. Program button
20. Display dim button
21. Mute button
22. Alarm / timer button
23. Volume decrease button
BATTERY INSTALLATION
1. Press and hold the open button and slide the battery
cover up.
2. Place two AAA batteries, according to the polarization.
3. Close the battery compartment cover.
Caution:
• Remove the batteries if the remote control is not going
23
22
21
20
19 18
17 16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1