Krüger & Matz KM0945, Owner'S Manual

Page: 5 / 11

EN EN
Owner’s manual Owner’s manual
1
3
7
6
4
5
2
OPERATION
Installation
Mount the speaker to handlebar, or another part of bike
in a way that it points forward. The pilot has to be
mounted as close as possible to the place, where you
place your hand during ride.
Horn
• To power on the horn, press and hold the ON/OFF
button. The horn will emit a single beep. Now it is
ready to use.
• To use the horn, press the horn button.
• To change the horn, press the change horn button.
• To change the volume of the horn, use the volume
increase and decrease buttons. After each press, the
horn will beep, indicating current volume level. After
reaching minimum or maximum level of volume,
pressing the button again will not indicate volume
level.
• To turn off the horn, press and hold the ON/OFF
button.
Charging
• If the sound of the horn is weak, the battery has to be
charged.
• Connect provided microUSB cable to the charging
socket (placed under the rubber cap). Connect the
other end of the cable to a power adapter.
• Charging will be indicated with an LED next to the
charging socket.
• If the LED glows red, the horn is charging.
• If the LED glows green, the horn is charged. You can
disconnect the cable.
SPECIFICATION
• 4 horn sounds
• 5 volume levels
• Handlebar mounting
• Charging indicator
• Loudess: up to 100 dB
• Protection class: IP65
• Battery: lithium-ion / 3,7 V / 280 mAh
• Charging time: approx. 1,5 hours
• Cable length: 40 cm
• Material: ABS + PC
• Weight: 44,5 g