Owner’s manual
5
EN
SAFETY INSTRUCTIONS
Read the instruction manual carefully before first use and keep it for future
reference. The producer does not claim liability for inappropriate use and
handling.
•
Do not expose the product to to high temperature, sources of heat and
direct sunlight. Do not subject this equipment to water or humidity nor use
near strong magnetic fields. Do not handle this appliance with wet hands.
•
Disconnect this device from power supply if it is not going to be used for
a long period of time.
•
Do not use the device if it is damaged.
• Make sure to place this product on flat, dry and stable surface.
•
Prevent the device from falling on the ground or being strongly impacted.
•
Producer does not claim liability for any data loss, damage caused by
inappropriate use and handling or any mechanical damage.
•
Producer does not guarantee compability with every external device.
•
This product is not a toy; keep it beyond children’s reach.
•
Use only authorized accessories.
•
Do not attempt to repair/disassemble this device yourself. The device
does not have user-serviceable parts. In case of damage, contact with an
authorized service point for check-up/repair.
•
ALWAYS disconnect this device from power supply mains before
cleaning. Clean the unit’s exterior periodically with a soft, slightly damp
cloth. Do not use any abrasives or chemical agents to clean this product.
MOUNTING
1.
Before first use, mount the rubber
arm into the mouse bungee base:
slide the arm into the indentations
until fully assembled.
2. Guide your mouse’s cord through
the arm’s rail for drag-free
control (push the cord in gently
if necessary – the arm’s rail is
compatible with most USB cables’
diameters).
OPERATION
1. Connect the device to power supply (plug USB cable into micro USB
