Instrukcja obsługi
35
PL
ŁADOWANIE
1.
Należy użyć dołączonego do zestawu kabla USB i podłączyć jeden
wtyk do portu microUSB głośnika; następnie podłączyć drugi wtyk do
kompatybilnego portu USB komputera lub ładowarki sieciowej.
2.
Podczas ładowania, świeci się czerwony wskaźnik LED.
3. Kiedy bat
eria jest w pełni naładowana, wskaźnik LED gaśnie.
Uwagi:
• Nale
ży upewnić się, że przed pierwszym użyciem bateria jest w pełni
naładowana.
•
Proces ładowania trwa także wtedy, gdy głośnik jest wyłączony.
TRYB STEREO
1.
Należy sparować jeden z głośników z urządzeniem zewnętrznym (patrz
„Tryb Bluetooth – Parowanie”). Ten głośnik będzie głośnikiem głównym.
2.
Następnie należy włączyć drugi głośnik (nacisnąć i przytrzymać przycisk
zasilania).
3.
Dwa razy nacisnąć przycisk Bluetooth na obu głośnikach, aby je połączyć;
wydadzą one sygnał dźwiękowy.
4.
Głośniki zasygnalizują udane połączenie sygnałem dźwiękowym. Tryb
stereo został aktywowany. Teraz możliwe jest odtwarzanie muzyki w
trybie stereo z urządzenia zewnętrznego.
5.
Wskaźnik Bluetooth na głośniku głównym (lewy kanał) miga powoli na
niebiesko; wskaźnik Bluetooth na głośniku podrzędnym (prawy kanał)
świeci n
a niebiesko.
Uwagi:
• Dla u
zyskania optymalnego efektu dźwiękowego, należy umieścić
głośniki w odległości maksymalnie 10 metrów od siebie, upewnić się, że
nie ma pomiędzy nimi żadnych przeszkód oraz że odległość pomiędzy
nimi jest równa.
•
Głośniki połączą się automatycznie przy każdym włączeniu.
•
Aby rozłączyć głośniki i opuścić tryb stereo, należy nacisnąć i przytrzymać
przyciski – i + jednocześnie na jednym z głośników. Lista parowania
głośnika zostanie wyczyszczona.
•
Głośnik główny nawiązuje połączenia z urządzeniami zewnętrznymi
oraz powinien być wykorzystywany do pozostałych trybów. Głośnik
podrzędny może się połączyć jedynie z głośnikiem głównym.
Summary of Contents for KM0522XL
Page 2: ......
Page 52: ...www krugermatz com is a registered trademark ...