23.
I N STA L L E N D C A P S T O F RO N T T R AC K
Use the provided fasteners and a 1/16” allen wrench to
gently secure the end cap to the front track. Do not
over-tighten!
Repeat on the other end of the track, if applicable.
1
2
End cap assembly may vary at each end of the track.
Select the scenario below that best matches the track configuration:
• No perpendicular wall fittings – follow the steps below for each end.
• Perpendicular wall fitting on one end – follow the steps below for the opposite end.
• Perpendicular wall fittings on both ends – the track was completed in the previous step. Proceed to the next step in these instructions.
Temporarily slide one door stop to each end of the
front track. Snug, but do not tighten the stops yet.
22.
AT TAC H D O O R ST O P S T O F RO N T T R AC K
1
If installing Premium Door Stops, reference those installation instructions in parallel.
