![background image](http://html1.mh-extra.com/html/krown/portaview-pv20/portaview-pv20_instructions-manual_2004976006.webp)
5
III
HOW TO ANSWER A TTY/TDD CALL
1: When the telephone rings, turn on the PortaView and place
the telephone handset onto the rubber acoustic cups. (see FIG.1)
2: Type your greeting followed by GA to signal the other person
to begin typing.
3: Continue typing back and forth remembering to use GA at the
end of each statement.
4: When you are finished, type GA TO SK.
5: When both parties type SK, the conversation is finished.
You can hang up the telephone and turn off your PortaView.
NOTE TO HEARING PEOPLE
You can recognize an incoming TTY/TDD call in two ways:
1: The caller will press the space bar and you will hear
electronic beeps
OR
2: There will be a silence on the other end assume this
could be a TTY/TDD call and follow the steps
given above.
The PortaView comes with a rechargeable battery pack as a
standard feature. The battery can supply up to 8 hours of power
when the PortaView is not plugged into an electrical outlet.
To USE the battery:
1: Disconnect the adapter/charger from the PortaView.
2: Use the PortaView as usual.
To RECHARGE the battery:
1: The Power Light will blink when the battery is weak.
2: Turn off the PortaView.
3: Connect the adapter/charger to the PortaView.
4: Plug the adapter/charger into an electric outlet.
5: Leave the PortaView plugged in and turn off for
12 to 15 hours.
FIG.5
FIG.6
VI
USE AND CARE OF
RECHARGEABLE BATTERIES
10