![background image](http://html1.mh-extra.com/html/krown/krown-200/krown-200_instruction-manual_2004971011.webp)
GETTING STARTED (CONT.)
ELECTRONIC VOICE
The electronic voice is a single programmable voice message that is stored in the memory of your
TDD. The message is used for calling hearing people at VOICE/TDD number. The TDD will also
send your state’s voice number, so the caller will know how to contact you. You must first program
this Voice Relay number by using [CTRL]+[K]. The voice message will be repeated until your
TDD conversation begins (when your TDD receives signals from another TDD or you type on
the keyboard).
TO ENTER RELAY VOICE MESSAGE
The Krown 200 gives you one electronic voice message: “Please use TDD or Call through Relay. X
XXX XXX XXXX.” To enter your relay voice and TTY number:
TTY relay number’s stored.
Voice relay number stored.
To automatically dial the TTY relay number, press.
Clears the relay number you have stored.
To turn the Electronic Voice ON or OFF
• Press [CTRL] and [SPACE BAR] to turn your Electronic Voice on. VOICE ON will appear
on the display screen.
• Press [CTRL] and [SPACE BAR] to turn your Electronic Voice off again. VOICE OFF will
appear on the display.
SPACE BAR
+
CTRL
CTRL
+
K
TTY RELAY NUM
RETURN
VOICE RELAY NUM
CTRL
R
+
CTRL
SHIFT
+
+
R
RETURN
SENDING VOICE ANS.
PLEASE WAIT.
CHECK FOR DIAL TONE
DIALING XXX
9
Summary of Contents for Krown 200
Page 1: ...MODEL Krown 200 1st Edition ...
Page 36: ...34 NOTE ...