background image

1

2

3

4

5

6

7

8

9

10

11

12

1.   LINE OUPUT 

Balanced Line outputs have been provided for the LEFT & RIGHT 
channels through individual 6.3mm phone jack sockets. For 
making balanced and unbalanced output connections, refer to 
‘Plugs Wiring Details” 1c and 1d on page 7 of this manual. 

2.   SEND OUTPUT 

It provides the combined pre-fader output of all the input channels 
through a 6.3mm mono phone jack. The pre-fader output is mainly 
used for stage monitoring application. 

3.   RETURN INPUT 

It is designed for accepting balanced stereo signal through 6.3mm 
stereo phone jack sockets. The Return input signals are directly 
mixed with the & R main mix signals so that it is available at LINE 
OUTPUT & HEADPHONE OUTPUT. 

4.   LEFT & RIGHT OUTPUT LEVEL INDICATOR

 

The output signal level from Left & Right channels is indicated by 
an individual 10 segment LED array. Each LED array is calibrated 
to display out signal levels varying from -20dB to +15dB. 0dB LED 
glows to indicate the rated output level of +4dBu. 

5.   LEFT MASTER CONTROL 

It controls the signal level of the LEFT channel LINE output which 
is available through 6.3mm Stereo Phone Jack. 

6.   RIGHT MASTER CONTROL 

It controls the signal level of the RIGHT channel LINE output 
which is available through 6.3mm Stereo Phone Jack. 

7.   EFFECT MASTER CONTROL LEFT CHANNEL 

For setting the level of delay signal in the LEFT channel LINE 
output signal. 

8.   EFFECT MASTER CONTROL RIGHT CHANNEL 

For setting the level of delay signal in the RIGHT channel LINE 
output signal. 

9.   FEEDBACK CONTROL 

For setting the number of repetitions within the selected delay 
time. 

10. DELAY CONTROL 

For setting the delay time within the selected delay time. 

11. HEADPHONE OUTPUT 

For connecting a stereo headphone through a 6.3mm stereo 
phone jack. The headphone output is used for personal monitoring 
& its level is not affected by the setting of master control. 

12. HEADPHONE CONTROL 

It is used for controlling the level of stereo signal which is available 
as headphone output. 

KMX-8.2/12.2

5

The Output, Effect & Headphone Section

Summary of Contents for KMX-8.2









Reviews: