Mixing circuit
To connect the mixing heating cycle 2, connect the circulation pump M6 to the output Q8. And the
mixing valve M7 to Q9 and Q10. To control the temperature, connect the mixing cycle sensor to input
A7. The request to turn on the mixing heating cycle 2 is the room thermostat signal connected between
GND and D6 (picture below) or room corrector KT-1(2) signal (chapter 3.5) or weather curve.
Digital output connection
clamp Q8
(heating cycle).
Connecting clamp of the
digital output Q10 (mixing
cycle).
Connecting clamp of the
digital output Q9 (mixing
cycle).
Connecting clamp of the
analogue input A7 (mixing
heating cycle 2
temperature sensor).
Voltage-free connection
clamp digital input D7
(thermostat - optional).
MD1 (MBIO12)
3
JMP
