2
Kronos Robotics
Super-PID Wiring
Tools Needed For This Project
•
Phillips screwdriver
•
Small Flat head screwdriver (Super-PID Terminals)
•
Small Phillips screwdriver (G540 Terminals)
•
Wire cutters/ strippers
Other Items Needed For This Project
•
Super-PID Controller
•
Regulated 5v power supply
•
Hookup Wire
Tip
You can get a regulated 5v power source a from your PC via the USB cable or from one of the hard
drive connectors inside your PC. The connector will have four wires.
Yellow = 12V
Black = GND
Black = GND
Red = 5V
You will want to use one of the black wires and the red wire.
The following is the power supplu that I used on this project.
PowerSupply
Super-PID
PowerSupply
