Kronos H-46 Series, Operation, Safety And Spare Parts Manual

Page: 14 / 46

-A9-
Strap Tension Force Correspondence Table:
H-46A 1 2 3 4 5 6 7 8 9
normal
kg 90 110 130 150 170 190 210 230 250
lbs 198 242 286 330 375 418 463 507 551
soft
kg 40 52 64 76 88 100 112 124 136
lbs 88 114 141 167 194 220 247 273 300
H-46B 1 2 3 4 5 6 7 8 9
normal
kg 120 155 190 225 260 295 330 365 400
lbs 264 342 419 496 573 650 727 805 882
soft
kg 40 55 70 85 100 115 130 145 160
lbs 88 121 154 187 220 253 286 319 353
5.3.3 Adjusting the Sealing Time
Press and hold the button “D” for 1 sec, if the tool beeps, the tool is for adjusting the
sealing time now. The “F” Digital display will show the current sealing time setting.
Press then release the button “D” to change the sealing time range, and the mode
sequence is as the cycle below. Or press and keep holding the button “D”, then the
sealing time range will be changed automatically with the sequence.
1

2

3

4

5

6

7

8

9
5.4 Feeding the Strap Around the Package
The strapping is fed around the package as illustrated.
Warning! The plastic strap which will be
welded must be free from oil, grease and
other dirt.
Dirty plastic straps can't be welded correct!
5.5 Inserting the Strap
Pull up the handle lever firmly with your right hand.
Insert the two straps well aligned on each other into
the strap guide using your left hand.
Release the handle lever.