kronings Mover KG2M 2011, Installation And User Manual

Page: 13 / 32

www.kronings.com - next generation caravan equipment
When installed on standard Flat Frame and on
BPW, Vario III Frame the Kronings Flat Frame
kit must be ordered seperately.
When installed on standard ERIBA Touring
Frame the Kronings ERIBA Frame kit must be
ordered seperately.
Place the moving system on the same height
as the wheel hub. The height difference can
differ no more than 45 mm.
When the rollers are drawn away from both
tyres, the optimal distance between wheel
and roller is 20 mm.
Install the transverse pole so both movings
systems are connected and raise the moving
system up under the chassis of the caravan.
IMPoRTanT: Make sure there is minimum 10
mm free space between the wheel and the
gear box of the moving system when the roller
is driven into the tyre.
The fitting of the moving system is installed
loosely on the frame without tightening the
bolts.
Washer
Washer
Bolt
Nut
Nut
10 mm.
Installation and user manual 13
20 mm.
Max. 45 mm.