Instruction Manual KG-201
23
5
Working with the Small Chute
The small chute is located at the pushing handle
(4).
Its purpose is to slice long and thin material
(e.g. cucumbers or carrots).
Before operating make sure that the collecting
container
(6)
and the ejector
(7)
are installed.
Install the slicing disk and close the lid. Move
the pushing handle
(4)
to the right and slide it to
its lowest position. Remove the pusher
(5)
out of
the small slicing compartment and fill the small
compartment with material. Start the engine by
pushing the green button
(10)
and use the
pusher
(5)
to push the food with moderate force.
Advice: Insert the long material always with the
peak first.
Never use anything else but the pusher (5) for pushing
down the material.
