Instruction Manual KG-201
21
4
9
2
3
8
6
20
8
Installing and Removing the Slicing Disks
To install the slicing disks
(9)
you have to
move the pushing handle
(4)
to the left.
You also have to open the lid
(2)
. Install
the slicing disk
(9)
on the axle. Move the
disk counter clockwise until the disk
moves downward.
Advice: you should not be able to lift the
slicing disk after your installation
To remove the slicing disk open the lid
(8)
and turn the disk
(9)
clockwise till the
end. Now remove the disk from the axle.
Using the cube grates
If using round cube grates
(8)
there is an addi-
tional adapter
(20)
required. This is inserted
into the collecting container
(6)
first
.
You can
then insert the cube grate
(8)
.
When using cube grates
(8)
in an elongated form,
no adapter is needed. You can directly insert
them into the collecting container.
