Krone Swadro 807 Original Operating Instructions Download Page 50

Page: 50 / 94

Operation

Pos : 20.29 / BA/I nf o-Cent er/Schwader/F unkti onen der Sc halt er an der Bedieneinheit SW 807_810_907 @ 2\ mod_1202399889131_78.doc @ 59313

8.10.1

Adjusting the raking height - electrically (optional for Swadro 810, Swadro 907)

Danger! - Unexpected actions on the machine.

Effect: Danger to life, injuries or damage to the machine

•

The control unit must be turned off before driving on public roads.

•

Do not activate both switches at once. Doing so could blow the fuse in the machine
switch box!

•

The switches for the other functions must be in neutral position.

•

To prevent functions from being triggered accidentally, the control unit must be turned off
after use.

8.10.2

Function of switches on the control unit (optional for Swadro 810, Swadro 907)

The raking height of the right and left rotor is adjusted by the control unit.

SW9070006

Fig. 24

Item

Designation

Function

Main switch

Switches the control unit on and off

Pilot lamp (green)

Lit when the control unit is turned on

Rocker switch (key release = end
function)

Setting for the raking height left

Rocker switch (key release = end
function)

Setting for the raking height right

Pos : 20.30 / BA/-----Seit enumbruc h------ @ 0\ mod_1196175311226_0. doc @ 4165

Summary of Contents for Swadro 807































































































Search results

Summary of Contents for Swadro 807

Reviews:

Krone Swadro 807, Original Operating Instructions, Page: 50 / 94

Search results

Summary of Contents for Swadro 807

Reviews: